LITHIUM ION BATTERY DRILL /DRIVER X 14,4 - LI LITHIUM ION BATTERY DRILL /DRIVER Operation and Safety Notes Betjenings- og sikkerhedsvejledning SKRUE- /BOREMASKINE MED LITHIUM-ION-BATTERI Bruks- og sikkerhetshenvisninger BATTERIDREVET DRILL C E3335_Akkubohr-Schrauber_Cover_X14.4V_LB3C.indd 2 23.04.2008 16:12:18 Uhr Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner. Slå opp siden med illustrasjoner før bruksanvisningen leses. Bli først kjent med alle apparatets funksjoner. GB / IE DK NO Operation and Safety Notes Betjenings- og sikkerhedsvejledning Bruks- og sikkerhetshenvisninger Page Side Side 5 15 25 E3335_Akkubohr-Schrauber_Cover_X14.4V_LB3C.indd 3 23.04.2008 16:12:19 Uhr 1 2 9 8 3 4 5 7 6 A B C 12 D 1 2 13 10 11 E3335_Akkubohr-Schrauber_Cover_X14.4V_LB3C.indd 4 23.04.2008 16:12:25 Uhr Kompernaß GmbH Burgstraße 21 44867 Bochum (Germany) Last Information Update · Tilstand af information Opplysningenes gyldighet: 04 / 2008 Ident.-No.: X 14,4 - LI042008042008-3C C 23.04.2008 16:12:16 Uhr E3335_Akkubohr-Schrauber_Cover_X14.4V_LB3C.indd 1 Table of content Introduction Intended purpose ...............................................................................................................Page Equipment Components.....................................................................................................Page Items supplied ....................................................................................................................Page Technical Data ...................................................................................................................Page 6 6 7 7 General safety advice for electrical power tools 1. Workplace safety ..........................................................................................................Page 2. Electrical safety..............................................................................................................Page 3. Personal safety...............................................................................................................Page 4. Careful handling and use of electrical power tools ....................................................Page 5. Careful handling and use of rechargeable devices ....................................................Page Attention - Service lines! ....................................................................................................Page Original ancillaries / accessories ......................................................................................Page 7 8 8 9 9 10 10 Safety advice relating to cordless drill drivers ..........................Page 10 Before first use Removing / charging / inserting rechargeable battery pack ...........................................Page Changing tools ...................................................................................................................Page 2 Gear Drive ......................................................................................................................Page Torque pre-selection ...........................................................................................................Page 10 11 11 11 Preparing the tool for use Switching On / Off ..........................................................................................................Page Adjusting the speed ...........................................................................................................Page Switching direction of rotation ..........................................................................................Page Tips and Tricks ....................................................................................................................Page 11 11 12 12 Cleaning and Maintenance ............................................................................Page 12 Disposal.............................................................................................................................Page 13 Information Service ................................................................................................................................Page 13 Conformity Declaration / Manufacturer ...............................................................................Page 13 GB/IE 5 E3335_Akkubohr-Schrauber_Content_X14.4V_LB3C.indd 5 22.04.2008 16:25:44 Uhr Introduction The following icons / symbols are used in this instruction manual: Read instruction manual! Observe caution and safety notes! Caution ­ electric shock! Danger to life! Explosive material! Drill chuck, Made In Germany Spindle lock Drill setting (torque preselect) Wear hearing protection, dust protection mask, protective glasses and protective gloves. Keep children away from electrical power tools! Protect electrical power tools from moisture! Check that the device, mains lead and plug are in good condition! Dispose packaging and appliance in an environmentally-friendly way! n0 V~ mA A / Ah no-load speed Voltage Milliamps / Amps / Amp-hours DC (current and voltage type) Safety class II Cordless drill driver X14.4 - LI Q Introduction in serious physical injury. The manufacturer accepts no responsibility for damage(s) resulting from improper usage. The appliance is not intended for commercial use. Q Before you use it for the first time, it is essential that you make yourself fully familiar with the functions of the appliance and find out how to correctly handle electrically powered tools. To do this, read the following operating instructions carefully. Retain these instructions for future reference. Additionally, pass them on to whoever might acquire the appliance at a future date. Q Equipment Components Gear selector switch Battery display LED Direction of rotation switch/lock On/Off switch Soft-grip Battery pack Battery unlocking button Torque preselection Quick-release chuck Mains adapter Mains adapter LED Charging station Charging indicator LED Intended purpose This appliance is designed for drilling and screwing into wood, plastic and metal. Use the appliance only as described and only for the purposes indicated. Any other uses, and modifications to the appliance, are deemed to be improper usage and may result 6 GB/IE 1 2 3 4 5 6 7 8 9 10 11 12 13 E3335_Akkubohr-Schrauber_Content_X14.4V_LB3C.indd 6 22.04.2008 16:25:45 Uhr Introduction / General safety advice for electrical power tools Q Items supplied Total vibration (vector sum of three directions) is calculated in accordance with En 60745: Drilling in metal: Screwing: Vibration emission value ah, D= 1.944 m / s2, uncertainty K= 1.5 m / s2, Vibration emission value ah= 2.101 m / s2, uncertainty K= 1.5 m / s2. 1 Cordless drill driver X14.4 - LI 1 Rechargeable battery pack X14.4 - LI - 1 1 Charging station X14.4 - LI - 2 1 Mains adapter X14.4 - LI - 3 1 Operating manual 1 Booklet "Warranty and Service" Q Technical Data 1st gear: n0 0 ­ 400 min-1 2nd gear: n0 0 ­ 1200 min-1 14 V 1.0 ­ 10 mm 10 mm 30 mm 19 plus drill setting no-load speed: no-load speed: nom. voltage: Chuck capacity: Maximum drill size: Steel: Wood: Torque settings: WArNING! The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in En 60745 and can be used to compare devices. Different uses of the device give rise to different vibration levels and in many cases they may exceed the values given in these instructions. It is easy to underestimate the vibration load if the electrical power tool is used regularly in particular circumstances. Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working. X14.4-LI-1 rechargeable battery pack: Type: LITHIUM-IOn nom. voltage: 14 V Capacity: 1300 mAh X14.4-LI-2 charging station: X14.4-LI-3 mains adapter: Primary: nom. voltage: 100 - 240 V ~ 50 / 60 Hz Rated current: 0.6 A Secondary: nom. voltage: Rated current: Charging period: 16.8 V 0.65 A Approx. 3 hrs. General safety advice for electrical power tools WArNING! read all the safety advice and instructions! failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury. KEEP ALL THE SAfETY ADVICE AnD InSTRUCTIOnS In A SAfE PLACE fOR fUTURE REfEREnCE! Noise / vibration data: Values determined in accordance with En 60745 The sound pressure level (A-weighted) of the device is typically 70 dB (A). Uncertainty K=3 dB. The sound level while working can exceed 80 dB (A). Wear ear protection! 1. Workplace safety a) Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents. GB/IE 7 E3335_Akkubohr-Schrauber_Content_X14.4V_LB3C.indd 7 22.04.2008 16:25:46 Uhr General safety advice for electrical power tools b) Do not work with the device in potentially explosive environments in which there are inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes. c) Keep children and other people away while you are operating the electrical tool. Distractions can cause you to lose control of the device. f) outdoor use reduces the risk of electric shock. Use a residual current device (rCD) for protection if operating the electrical power tool in a moist environment is unavoidable. The use of an RCD reduces the risk of electric shock. 3. Personal safety a) remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. b) Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. c) Avoid unintentional operation of the device. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if you carry the device with your finger on the On / Off switch or with the device switched on. d) remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. e) Avoid placing your body in an unnatural position. Keep proper footing and balance at all times. By doing this you will be in a better position to control the device in unforeseen circumstances. f) Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of moving parts. Loose clothing, jewellery or long hair can become trapped in moving parts. g) If vacuum dust extraction and collec- 2. Electrical safety To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock. b) Avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an increased risk of electric shock if your body is earthed. c) Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tangled mains leads increase the risk of electric shock. e) When working outdoors with an electrical power tool always use extension cables that are also approved for use outdoors. The use of an extension cable suitable for 8 GB/IE E3335_Akkubohr-Schrauber_Content_X14.4V_LB3C.indd 8 22.04.2008 16:25:47 Uhr General safety advice for electrical power tools tion devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust. g) Use the electrical power tool, accessories, inserted tools etc. in accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other th ...